Here’s a great idea to quill a stylized Christmas Tree, perfect for cards and decorations, courtesy of Ann at All Things Paper.

Elizabeth says:

In the olden days it was the custom for a country lad to take an evening walk with his lass in the fields at harvest time. The lad would weave and plait straw to make a buttonhole. If the couple were courting, the lass would wear it over her heart as a token of her love. With this in mind, and by adapting techniques used by straw weavers and corn dolly makers, wonderful harvest designs can be made, but entirely from paper. Combined with quilled wheat ears they can make wonderful and unique cards and gifts.

Find out how to make this project with our tutorial:

You will need:

• 3mm wide yellow paper
• Cocktail stick (toothpick)
• PVA (white) glue
• Quilling tool
• Ribbon

Six strand plait

Please note the six paper strands are labelled for the purposed of this tutorial, but this would not be necessary for the weaving!

Take six 40cm lengths of 3mm wide light yellow paper. Glue one end of each strip of paper together (below, left), so they are splayed out in a star shape with a gap at the bottom. Now take the length marked A and fold over to where the gap is, between the lengths marked C and D (below, right).

By folding A down you have now filled one gap but created another gap where A was, between F and B.

Now fold D up to the new gap between B and F (below, left).

As there is a gap where D was, fold B over to the gap between A and E (below, right).

Do you see where we’re going with this yet? Each time you have folded a strip over, the next strip you’ll fold is the next strip clockwise from the previous strip.

We just moved B. Moving clockwise from B, the next strip is E (above, right). So the system of ‘filling the gap’ by folding over each length continues, with E folded over to the gap between C and D (below, left).

Moving clockwise from the new position of E takes us to C. So fold C over to the gap between B and F (below, right).

Fold F down to the gap between A and E (below, left).

Fold A up to the gap between C and D (below, right). 

Now you are back at step 1, so you can run though the whole folding sequence again.

It will take some practice to begin with, but it is quite simple once you have the knack! I hold the papers in my left hand and use my right hand to fold the lengths over. Plait the 40cm length and then attach another 40cm lengths to each of the six ends. Continue to fill the gap, plaiting, until you have the required length. The plait can now be stretched slightly to lengthen it.

To make the wheat ears take lengths of the same light yellow paper, varying between 4cm and 8cm long. Using a quilling tool, make loose closed coils and then pinch each into a teardrop shape. Glue these together starting with the smallest to form an ear of wheat. Make 9 wheat ears and attach.

Tip: While it is best to plait in one session to keep an even tension for a uniform result, you will get hand ache, so only plait for an hour and then take a break.

Alternative: Four strand plait 
This is formed in exactly the same way, but start with 4 strands and a gap. Again, remember to move clockwise each time to pick up the next strand, and you’ll never lose your place. This wreath was made with 3 lengths of the 4-strand variant twisted together:

Author Bio:
My name is Elizabeth Moad and I live in Suffolk, England. I am a busy designer and began quilling over 10 years ago, but I enjoy using any papercraft technique. This has lead me to write four craft books, the latest of which is called “Thrilling Quilling“ by David & Charles Publishers. As I enjoy teaching and sharing ideas I hope that this tutorial sparks lots of creativity in you! Read about me or contact me at www.elizabethmoad.com

I’ve seen paper jewellery made with this paper plaiting technique, and I’m sure you could apply it to other paper crafting too. Thank you, Elizabeth, for sharing the secret with us!

Would you like to write for Folding Trees? See our Submissions page for details!

Quilling really does have more application than just making flowers to decorate cards etc (not that there’s anything wrong with that), as shown by our Folding Trees friend Ann Martin’s stunning replica ring of antique keys – these are all made from paper!

Discover the art of paper filigree and make an elegant gold-gilded seashell or starfish pendant:

Find out how to make these projects with our tutorial:

You will need:

• Quilling paper, black with gold-gilded edge, 1/8 inch width (standard size). Specialty quilling paper is available from online suppliers, or you can gild plain black paper by running a gold leafing pen along the edge
• Quilling tool
• Glue (suitable for paper)
• Ruler
• Scissors
• Glass-head straight pin
• T-pin or paper piercing tool (to apply glue)
• Tweezers (to aid in coil positioning)
• Crimping tool
• Plastic lid (to use as glue palette)
• Non-stick work board e.g. waxed paper or Styrofoam tray (to assemble parts)
• Damp cloth or paper towel (to keep fingers glue-free)
• 2 flat nose jewelry pliers
• Jump rings
• Purchased necklace chain or satin cording

Basic Quilling Instructions:

If you are brand new to quilling, purchase a package of plain quilling strips or use a paper trimmer to cut strips from computer text weight paper – either will be fine for practice. You’ll also need a tool with which to roll the strips. Some quillers use only their fingers, but there is also the choice of a needle tool or slotted tool, available at arts and crafts stores or from online suppliers.

If you prefer that your coils not have the center crimp that a slotted tool produces, use a needle tool. It takes a bit more effort to learn to quill with a needle tool, but with practice you’ll soon be making evenly rolled coils.

Rolling a coil with a needle tool

To roll a coil with a needle tool, dampen fingertips and curve one end of strip across needle. Use the thumb and index finger of whichever hand is most comfortable to roll the paper around the needle. Use even pressure and be sure to roll the paper, not the tool. When strip end is reached, allow the coil to relax, slide it off the tool, and glue the end. This relaxed roll is called a loose coil and is the basic building block of many types of quilled shapes.

Relaxed coil on tool

TIP: Always use the smallest amount of glue possible – none should show on the finished project.

To roll a coil with a slotted tool, slide strip end into slot; turn tool with one hand while evenly guiding paper with the other.

Rolling a coil with a slotted tool

If the coil end is glued while the paper is still wound snugly, this is called a tight coil.

TIP: A torn strip end (rather than cut bluntly with scissors) blends best to give a tight coil a perfectly round shape.

Wheatears are looped columns that make up the seashell body and starfish arms. To make a wheatear:

1. Make a ¼ inch fold at one end of a 10 inch (approx) strip (see A, above).
2. Loop strip completely around this fold; apply glue at the bottom of the loop to anchor it (see B, above).
3. Continue making evenly spaced loops, holding wheatear at bottom anchor point while doing so. Each successive loop should be slightly larger (taller) than the previous loop. Shape loops gently as you go to form a column (see C, above).
4. Glue end and trim excess paper.

Seashell Instructions:

1. Make 9 wheatears:
    Make 2 with 3 loops
    Make 2 with 4 loops
    Make 2 with 5 loops
    Make 3 with 6 loops

2. Glue wheatears side by side with tallest three in center; arrange remaining wheatears by descending height on each side of center loops.

3.  Make shell base – roll an 18 inch strip to make a loose coil. Grasp at glue join and at opposite side. Pinch to create two points – this is called a marquise.

Making a marquise

4.  Shape marquise by holding both points and pressing toward coil center. Glue at base of wheatears.

5.  Stack and glue two 3 inch strips to make a double strip for increased strength. If there is excess glue on outer edges, wipe strip gently with a damp cloth while glue is still wet.

Crimper

6.  Run strip through crimper when glue is completely dry. Apply glue to one side of crimped strip and press gently in place around wheatears to make shell shape. Trim excess.

7.  Reinforce pendant strength by dotting glue at join spots on back side.

8.  Use flat nose pliers to open jump ring; slip ring through top of center wheatear; close ring. Slide necklace chain or cording through ring.

Starfish Instructions:

1.  Make five wheatears, each with 6 loops.

2.  Stack and glue two 14 inch strips to make a double strip for increased strength. If there is excess glue on outer edges, wipe strip gently with a damp cloth while glue is still wet.

3.  Run strip through crimper when paper is completely dry. Cut into 2 ½ inch lengths. Apply glue to one side of crimped strip and press gently in place around each wheatear. Trim excess.

4.  Arrange wheatears in a star shape and glue at center point. Bend tips slightly for a natural look.

4.  Make a 4 inch tight coil using 1/16 inch wide paper (cut 1/8 inch paper in half lengthwise). Gently press against underside of coil with ball of glass-head pin or head of T-pin to make a domed tight coil. Apply a little glue inside dome to hold curved shape. Glue to center of starfish.

5. Reinforce pendant strength by dotting glue at join spots on back side.

6. Attach jump ring to one arm and slide necklace chain or cording through ring. 

Author Bio:

I’m delighted to have this opportunity to share my love of handcrafted paper jewelry. I discovered paper filigree, also known as quilling, several years ago and I’ve been hooked ever since. Quilling has been in existence for hundreds of years and I’m happy to be a part of keeping the art alive by bringing a fresh, modern approach to traditional quillwork. I hope you’ll enjoy making these necklace pendants. They’re comfortable to wear and surprisingly sturdy, as well as great conversation starters. People won’t believe they’re made of paper! I enjoy blogging at All Things Paper about creative people world-wide who make fascinating things with paper and occasionally feature some of my own projects.

Thank you so much, Ann, for your introduction to quilling and your lovely pendant projects!

Would you like to write for Folding Trees? See our Submissions page for details!

We are very interested to see if you have any (paper-related) New Year’s resolutions? Are you going to try some new techniques? Or is there a particular tutorial you really want to try out? Please leave a comment – we would love to know what you are working on!

We’ll leave you with some quilled inspiration by Yulia Brodskaya, absolutely gorgeous! [via: Craft]